ZUUL
10-12-2007, 01:54 AM
I listing on here first to give you guys first crack at everything before it goes on eBay.
I'm parting out my MP5-SD5 A-5 to pay for my new setup. I'm also listing some Universal & Spyder parts I have around. So, have a look around. There's a lot of cool stuff to be had, some with custom work done.
Most is used but in excelent condition. I make sure to take very good care of my equipment. Any brand new stuff is labeled as such.
Everything is OBO, so I will consider ANY reasonable offer. Low-ballers need not apply.
S&H not included. For quote, give me your zip code.
Of course the "normally" prices don't count what you will pay for S&H in addition to the part.
Payment only accepted via PayPal (shipped to verified address), money orders, & cash (at your risk).
SpecOps Feedback (http://forum.specialopspaintball.com/index.php?showtopic=95754)
External Feedback: eBay 324 @ 100% (http://feedback.ebay.com/ws/eBayISAPI.dll?ViewFeedback&userid=diy_depot)
I don't hold anything until I have at least a deposit.
This list will ALWAYS BE UPDATED.
A5
Kit 'o Cool A-5 stuff
http://home.comcast.net/~DIY_Depot/sell/SOMP5Kit1311.JPG
-Change: Am parting out the kit
Kit includes: (I finally decided to keep the mag & palmer, but would be glad to tell you how to put them together.)
Special Ops A-5A2 MP Mag foregrip - Normally $29.95 - Yours for $22
Special Ops A-5A2 MP Mag foregrip completes the functional, mil-sim transformation of your Tippmann A-5 marker into what looks and shoots like a true sub-machine gun.
The MP Mag foregrip uses the same mounting location as the stock handle and is made from tough injection-molded plastic that can take heavy abuse without a problem. The durable foregrip is a "mod that makes sense", providing form and function.
*Can be used w/o mag as well.
Special Ops Air-Thru Stock - Normally $84.95 w/air internals - Yours for $64
Complete the look of your A5A2 with the SO Commando air-thru butt stock. Running remote is the way to go for the ultimate in ergonomics and realism. Air-thru stocks take the air tank off your gun and out of the way, allowing you to easily roll the gun up to your shoulder, sight down the barrel, and hit your target. The Commando stock features a cut-out design that makes it easy to sight down the barrel even through your paintball goggles. The Commando butt stock is lightweight and durable, with sturdy glass-filled nylon construction. This ergonomic design makes it easy for you to disconnect your air source. Installation is easy thanks to a solid attachment point.
Features:
-Easy installation
-Ergonomic design
-Sturdy and lightweight
- Includes quick-disconnect
Tech Specs:
-Length: 11 inches
-Height: 4 inches (at buttplate)
-To make it full air-thru, it can be used in conjunction with the side tombstone (http://www.specialopspaintball.com/shop/product_detail.asp?SKU=260+0001) or an air-thru MP mag (http://www.specialopspaintball.com/shop/product_detail.asp?SKU=210+0090) with a 90° microline.
Special Ops A-5 Stovepipe Hopper Offset Aluminum (Aluminum version no longer made)
http://home.comcast.net/~DIY_Depot/sell/SOElbow1315.JPG
Clear your line of sight down your Tippmann A-5 with this ingenious creation. By slightly tilting the A-5 hopper to the right side, your A-5 is cleared of obstructions down the barrel, allowing for sight mounting and a clear view.
The Stovepipe is one part of Special Ops' Complete ergonomic solution.
Tech Specs:
-Material(s): Welded Aluminum
-Added Hopper Capacity: 18 paintballs
-Offset Angle: 30 degrees
-Attachment: snaps to your cyclone feed and hopper; no special tools required (tiiiiight fit)
Normally $19.95 - Yours for $13
Ricochet R5 - A-5 Black
http://home.comcast.net/~DIY_Depot/sell/RicochetR51316.JPG
The R5 is designed to fit the Tippmann A-5 cyclone feeder. Constructed of heavy duty polycarbonite plastic. This unit is tough. Featuring a transparent spring loaded lid and Ricochets patented deflection engineering.
*NOTE: It does have some silicon glue film left on it from when I glued on an ACU cover. But it doesn't effect anything besides finish here & there & could probably be removed with a little work. You might not even notice, but I'd rather mention it than have an unhappy customer who wasn't expecting it.
Normally $14.95 - Yours for $11
Lapco A-5 Bigshot, 12 Inch Bead Blasted Used once
http://home.comcast.net/~DIY_Depot/sell/LapcoBigshot1325.JPG
The 12 inch barrel with a .689 bore for medium-large paint. Comes with a bead blasted finish to match the A-5.
Normally $47.99 - Yours for $36
Lapco A-5 Autospirit, 12 Inch Bead Blasted
http://home.comcast.net/~DIY_Depot/sell/LapcoAutoSpirit____.JPG
My favorite one-piece barrel.
The 12 inch barrel with a .687 bore for medium paint. Comes with a bead blasted finish to match the A-5.
Works great with Visible Impact and other paint.
Normally $44.99 - Yours for $34
I'm parting out my MP5-SD5 A-5 to pay for my new setup. I'm also listing some Universal & Spyder parts I have around. So, have a look around. There's a lot of cool stuff to be had, some with custom work done.
Most is used but in excelent condition. I make sure to take very good care of my equipment. Any brand new stuff is labeled as such.
Everything is OBO, so I will consider ANY reasonable offer. Low-ballers need not apply.
S&H not included. For quote, give me your zip code.
Of course the "normally" prices don't count what you will pay for S&H in addition to the part.
Payment only accepted via PayPal (shipped to verified address), money orders, & cash (at your risk).
SpecOps Feedback (http://forum.specialopspaintball.com/index.php?showtopic=95754)
External Feedback: eBay 324 @ 100% (http://feedback.ebay.com/ws/eBayISAPI.dll?ViewFeedback&userid=diy_depot)
I don't hold anything until I have at least a deposit.
This list will ALWAYS BE UPDATED.
A5
Kit 'o Cool A-5 stuff
http://home.comcast.net/~DIY_Depot/sell/SOMP5Kit1311.JPG
-Change: Am parting out the kit
Kit includes: (I finally decided to keep the mag & palmer, but would be glad to tell you how to put them together.)
Special Ops A-5A2 MP Mag foregrip - Normally $29.95 - Yours for $22
Special Ops A-5A2 MP Mag foregrip completes the functional, mil-sim transformation of your Tippmann A-5 marker into what looks and shoots like a true sub-machine gun.
The MP Mag foregrip uses the same mounting location as the stock handle and is made from tough injection-molded plastic that can take heavy abuse without a problem. The durable foregrip is a "mod that makes sense", providing form and function.
*Can be used w/o mag as well.
Special Ops Air-Thru Stock - Normally $84.95 w/air internals - Yours for $64
Complete the look of your A5A2 with the SO Commando air-thru butt stock. Running remote is the way to go for the ultimate in ergonomics and realism. Air-thru stocks take the air tank off your gun and out of the way, allowing you to easily roll the gun up to your shoulder, sight down the barrel, and hit your target. The Commando stock features a cut-out design that makes it easy to sight down the barrel even through your paintball goggles. The Commando butt stock is lightweight and durable, with sturdy glass-filled nylon construction. This ergonomic design makes it easy for you to disconnect your air source. Installation is easy thanks to a solid attachment point.
Features:
-Easy installation
-Ergonomic design
-Sturdy and lightweight
- Includes quick-disconnect
Tech Specs:
-Length: 11 inches
-Height: 4 inches (at buttplate)
-To make it full air-thru, it can be used in conjunction with the side tombstone (http://www.specialopspaintball.com/shop/product_detail.asp?SKU=260+0001) or an air-thru MP mag (http://www.specialopspaintball.com/shop/product_detail.asp?SKU=210+0090) with a 90° microline.
Special Ops A-5 Stovepipe Hopper Offset Aluminum (Aluminum version no longer made)
http://home.comcast.net/~DIY_Depot/sell/SOElbow1315.JPG
Clear your line of sight down your Tippmann A-5 with this ingenious creation. By slightly tilting the A-5 hopper to the right side, your A-5 is cleared of obstructions down the barrel, allowing for sight mounting and a clear view.
The Stovepipe is one part of Special Ops' Complete ergonomic solution.
Tech Specs:
-Material(s): Welded Aluminum
-Added Hopper Capacity: 18 paintballs
-Offset Angle: 30 degrees
-Attachment: snaps to your cyclone feed and hopper; no special tools required (tiiiiight fit)
Normally $19.95 - Yours for $13
Ricochet R5 - A-5 Black
http://home.comcast.net/~DIY_Depot/sell/RicochetR51316.JPG
The R5 is designed to fit the Tippmann A-5 cyclone feeder. Constructed of heavy duty polycarbonite plastic. This unit is tough. Featuring a transparent spring loaded lid and Ricochets patented deflection engineering.
*NOTE: It does have some silicon glue film left on it from when I glued on an ACU cover. But it doesn't effect anything besides finish here & there & could probably be removed with a little work. You might not even notice, but I'd rather mention it than have an unhappy customer who wasn't expecting it.
Normally $14.95 - Yours for $11
Lapco A-5 Bigshot, 12 Inch Bead Blasted Used once
http://home.comcast.net/~DIY_Depot/sell/LapcoBigshot1325.JPG
The 12 inch barrel with a .689 bore for medium-large paint. Comes with a bead blasted finish to match the A-5.
Normally $47.99 - Yours for $36
Lapco A-5 Autospirit, 12 Inch Bead Blasted
http://home.comcast.net/~DIY_Depot/sell/LapcoAutoSpirit____.JPG
My favorite one-piece barrel.
The 12 inch barrel with a .687 bore for medium paint. Comes with a bead blasted finish to match the A-5.
Works great with Visible Impact and other paint.
Normally $44.99 - Yours for $34